Tag: London

Cardboard Challenge

Before:

I think this reproduction Edwardian-style armchair was originally from a certain well-known high street retailer. I found an old label stitched inside the seat’s cushion cover.

 I thought it had seen better days though I guess those days must have been even shorter then these suddenly dark and chilly ones we have had recently.

So I started ripping it down, you should of seen my face once I saw how the chair was manufactured!..Is there no end to how low some furniture manufacturer’s and suppliers will go (just to make a profit?) When I saw what was lurking underneath this piece I make no exaggeration when I call this a “cardboard copy”

Peter-Jefferies-chair-Before

After:

Lower-shot-peter-jefferies-chair

Out went all the nasty cardboard and crumbly foam fillings!

Refurbishing the arms, using English jute webbing and hessian wrapped in new rubberised hair and fresh new foams covered in polyester skin wadding.

The refurbished seat base used the same serpentine spring suspension system which were in decent nick, though this time I lashed the springs so they moved in unison and distributed the weight more evenly, prolonging their life.

The top cover (customer supplied) was from Osbourne & Little; a patterned floral weave called “Chandra”. Using a flame retardent barrier cloth to make the chair as fully compliant with the current health safety and fire regulations.

Finally finishing off the chair with old speckled gold decorative nails, choosing a hessian as a base cloth, sourcing some absolutely beautiful front legs with antique brass castors to replace the original old broken ones which had split and were missing their castors.

A much more distinguished, respectable (as well as upgraded) armchair arrived last night to a pleased customers home.

A Tickled Pink Parker Knoll Story …

Before:

Even though I explained that the cost of repair, refurbishment and recovery was comparable to Buying a completely brand new sofa my customer definitely wanted to have this Mid/late 20th Century modern Parker Knoll sofa restored to better than its former glory, as she loved the shape and size and practicality of it; with its fold down arms and fold away back allowing it to provide a great place to rest for her guests.

 After getting it into the studio, the rip-down revealed the extent of the complete seat failure. So I replaced all the broken serpentine springs, lashing them together with the still in good condition steel rods and clips (which took a little time and were a bugger to remove and replace!)

This time I also fitted and lashed hessian to the springs (something that wasn’t done originally), before fitting new wrapped seat foams. Refurbishing the arms with rubberised hair and foams and wrapping them in polyester before  cutting, stitching and fitting the new covers (backed with F/R barrier cloth to make the piece compliant) in a lovely pink velvet called “Peony” from Harlequin

My biggest challenge came with refitting the drop-arm mechanisms: Just when I needed to look at some old photos on my phone with just hours left before delivery,  I managed to loose a number of photo’s on my phone! Which were supposed to remind me of how to replace the drop-arm mechanisms in the arms. On that (very early) morning start I contacted some fellow upholsterers online. Shortly after a coffee I quietly and calmly thought the process through. By the time I did get some great responses back from the forum I had already worked out how to replace them! (Many thanks to those ladies and gentlemen for your input in any case) Nothing beats being able to figure things out for yourself !
Parker-Knoll-Just-collected-and-in-the-studio

After:

Before taking on this project I promised myself I wouldn’t ever work with “Shiny” or metallic Velvets  (They are usually not to my taste) ..However this velvet grew on me as I used it, the colour was lush and deep and for me had just the right level of lustre and by the end result It not only brightened up my studio, but brightened up my customers face and livened up her living room!

Ps: A big Thank you to my mate JJ for helping me deliver it: You’re a diamond!

Finished-and-delivered

 

 

Parker-Knoll-sofa-bed-conversion

 

 

 

 

The Battle of Chesterfield…

In spite of the many upholstery projects I have undertaken over the years I still feel relatively inexperienced and still enjoy the challenge taking on projects which teach me something new. Earlier this year I took on the task of recovering a Chesterfield-style sofa bed using my customers own fabric, a hard wearing velvet of unknown description which had to be backed with an flame retardant barrier cloth, in order for the piece to comply with the relevant UK Health, Safety and Fire Regs.

Although I have completed many deep-buttoned upholstery projects in the past, they mainly involved tackling the buttoning process on a “flat” shape. Even though this was a “modern” piece It still took me a while (and a good day with many thanks from Louise Boyland from Shoreditch Design Rooms )to help me build the confidence to button this shape and get to grips with Van dyking (a method of joining pieces of fabric or leather so that the joins wouldn’t be seen when buttoned).

Yes this project did take slightly longer than my estimated time, however it was my first piece of this type and certainly was worth doing, if not just for the experience but also being the first piece I was able to deliver using the New Nissan e-NV200 all-electric van which I loved using during a 2- day test drive.

My customer was so pleased to eventually have it finished  and delivered(the picture below was the only time I could get a half-decent shot of the piece still partially finished with the decorative nails “) She thanked me with an extra £50 tip.

 

2015-04-27 17.04.03

Non-Identical Twins..

Before:

The first of these pair of G-Plan E-Gomme chairs arrived in my studio last year from a lovely couple near Blackheath/Lewisham area,  who in my past many years ago had been great employers and have grown to become good friends and loyal supporters of my work, having seen my previous projects online and personally knowing what its like to run a business they were more empathic and sympathetic to the (daily) challenges faced being a self employed artisan/craftsperson

 

Cass-&-Neil-Staintons-1st-E-gomme-G-plan-chair

 

After: 

These pieces were a challenge because there not only had to be a fair few changes to the design; having prepared the show wood with the intention of developing one of these pieces to showcase a fabric textile print I had designed,  using the whole process to finally bring to market some of my previous skills in textile design into my current creative manifestation. Even roping in some fantastic help from a talented illustrator (Thanks Sarah McCarthy, your efforts will not be in vain!x)I couldn’t bring the design  to market as I couldn’t bring together enough resources  (I was attempting produce a specific fabric in time and so my customers had little choice but to choose fabrics they had sourced.

Luckily for me these customers had great taste (as well as tremendous patience), choosing 2 fabrics from Osbourne & Little:  Soumak , from their Tabriz Collection of weaves and “Dovetail” from their Abacus collection, making their use in these pieces compliant through the use of a flame retardant barrier cloth. Complimenting these fabrics,  I put together a custom wood stains for each. finishing the wood with layers of shellac and rubbing beeswax to create the right lustre. My heartfelt thanks to Katy Chaytor-Hill and Anna Frisch for their assistance.

 

G-plan-E-Gomme-chair-in-Osbourne-&-Little-'Dovetail'-from-Abacus-collection

 

 

 

 

G-plan-E-Gomme-chair-In-O&L-Soumak-Weave-from-Tabriz-Collection

 

Coming to you in Glorious AWT (African Waxblock Technicolour)…

Since producing the first of these a few years ago these custom African Waxblock technicolour patchwork Ottoman stools are becoming steadily very popular. I produced the latest one of these in July this year for a fan who saw my work on Facebook. Paying in instalments, I got little nervous and concerned when I couldn’t contact her as she had simply “Vanished” off the internet and hadn’t responded to my phone/text messages or emails!..I was delighted and surprised when one fine day in August my customer just randomly wandered into my workshop with her final deposit, explaining that she had become a victim of online fraud and hacking and had to wipe all presence of herself off the net! At that point I had almost finished the stool , needing a base cloth and custom feet attached (hence the lack thereof in the photo below)Upon finishing I delivered the stool to her parents’ address ,who were surprised and delighted that such a colourful piece had come to stay.

2015-07-25 18.39.36

Mid-20th century Modern Metamorphosis

Before:

This mid century modern armchair and footstool used a cleverly

stitched together fitted loose cover. My customer wanted to use

Flock’s Northmore Minor in Teal designed by Rachel Parker.

People don’t realise that sometimes cutting , making and fitting a loose cover can be as much work as refurbishing and producing a fitted cover.

Getting the curves right and bringing together this gorgeous textile design to “flow” throughout the shapes.

As this textile is printed on 100% Cotton, the use of a Flame retardent barrier cloth was essential for the pieces to comply with the relevant health,Safety & Fire Regs.

To make the cover more versatile and washable, I opted to make the seat cushion separate from the armchair unlike the original which was fixed.

The second piece, A Modern tub chair was tricky too: Each Pattern piece involved seams which were piped and then topstitched before

My many thanks to Jenny Wingfield For referring this lovely customer to me who sent me the following comments:

“Just mailing to say how much I love the work you have done on my three items, the chairs and the stool.  They have been done beautifully and make my room a changed place.  Your skills are just great and I appreciate all the work that has gone into them.  Thank you so much. Many thanks Pearl Brown”

 

2015-04-14 17.34.26

 

2015-04-14 17.33.56

 

 

After:

2015-06-01 17.02.31-1

 

2015-05-25 15.43.07

 

After

2015-08-12 17.19.50-1

 

2015-08-12 18.10.32-1

 

 

 

[portfolio_slideshow id=1979]

Getting off the Bench: Reworking a B&B Italia piece…

 

Before:

Before B&B Italia Charles Bench

I was asked by my customer to take this B&B Italia Italia “Charles” Bench , reduce it’s height by 1″and then deep-button (or “tuft” if you are reading this in the US) in a Sanderson Taormina velvet replacing the tired,

cat scratched and shrunk-in the-wash look of its original cover.

“Looks simple enough a task to me” you might say, until you realise upon removing the cover what is going on underneath; that the whole frame is made from

steel tubing and the high density foam sits directly on a bed of super strength jumbo elastic 3″ webbing.

Of the various ways that could secure the buttoning (sorry, saying “tufting” just doesn’t work for me!), I wanted to use a system that I felt would have the most inflexibility, by which I mean that over time, the pleats wouldn’t be tempted to move around over the foam and elasticated base, while still retaining the look and finish that would still respect the overall original design for Antonio Citterio for B&B Italia by Antonio Citterio

Processes I employed involved getting the whole foam cut down on a giant foam cutting bandsaw, removing the foam entirely from the frame, applying 120z hessian to the base of the foams, removing rubber strips from the tubular steel frame and introducing cut hardwood patterns to provide a tackable surface to secure the buttoning cord and cutting, and fitting extra wood strips as well as applying 1″ extra foam and sundries around the base of the bench which helped to “fill” the gap left between the legs and the base of the bench left from fitting the new cover.

As well as successfully “Van-Dyking” the Velvet as the overall bench width was wider then then width of the roll when taking into consideration the direction of the pile

After

2015-01-27 10.28.38-1

[portfolio_slideshow id=1801]

Many (Ottoman) Hands make light work…Working with my Brother Rodney

 This is my younger brother Rodney Clarke.
Like me and our father before us, He’s not afraid of a bit of hard graft and he’s also pretty handy (check out the Pioneer Skatepark he and his mates have built and rebuilt over the years)
Over Xmas and new year he, like me, worked his nuts off, as he was commissioned to design and build 6 cabinets (like the one he’s posing with below)with drawers, along with a load of other display stands, u
sing reclaimed wood, for  the “Ottoman Hands” Jewellery exhibition which took place from the 10th -12th January .

Rodneys Finished Cabinets1

The cabinets were designed by Rod to be completely modular, breaking down into transportable flat packs to be reassembled at the exhibition.
It was my pleasure and honour working with my brother and being involved the construction of each drawer base. 

75 in all had a padded bases, covered in calico for The Ottoman Hands jewellery stand at Earls Court.
Well done bruv! Great working with you. I look forward to our next collaboration!

2015-01-07 15.50.19

 

 [portfolio_slideshow id=1759]

Come On You Irons!!

Every so often my upholstery skills can take me away from upholstering beautiful chairs to working on seating whose use adds enjoyment of “the beautiful game” for the players, manager and potentially thousands of people inside the stadium every season.

It is an privilege to play my small part. I’ve always enjoyed watching Match of The Day (and loved playing the game in my youth). Now in my career it feels good that my skills can of service to a premiership football team (if not on the pitch!)

Congratulations to West Ham on their win against Manchester City this weekend. Best wishes for the rest of this season.

Special thanks to assistants Katie and Anna for coming off the bench and helping me put these projects in the back of the net!

Legends-WHUFC

Katie-removing-seating

Repaired-seats-WHUFC-3

2014-10-24-21.56.03

 [portfolio_slideshow id=1645]

Double trouble ..

I cannot deny that finishing these pieces of mid-century british furniture from G-plan was a tremendous relief for me (as well as the customer) It represented overcoming a real mental hurdle as for some reason I had got myself mentally “stuck”: I had previously upholstered a type 6250 in fabric for a friend before however this time I was asked to refurbish and recover these in a beautiful “Cowboy Burnt Tan” hide from Wildman & Bugby. So converting the fabric meterage to “hides” was a new lesson. I was recommended to the owners of these chairs, who are a lovely family living up In Chalfont St. Giles. They  also gave me  a matching footstool, a bent plywood G.A. Jenkins /Tecta chair and a children’s toy to re-upholster, recover and repair   respectively) of these pieces by  Photographer and friend Roulla Giorgio.  They showed me great patience during the process of producing these I went for an “advanced buttoning tutorial from my old tutor through which I gained more confidence to tackle both pieces.

I didn’t do myself any favours by going for full deep buttoning whereas the “original” cover only had “floating” buttons through sewn seams and also choosing to create a custom suspension system; re-enforcing the base of each seat first to accommodate carefully positioned Serpentine (zig-zag) springs, lashed together  between the original rocking mechanisms so that they provided optimum support without interfering with the rockers. This replaced the elastic green webbing which the seats bases had been previously fitted with.

..before

Before-Pic-G-plan-x2

 

 

 

and after

 

 

 

Twin-Ercol-image3

 

 

 

 


 

[portfolio_slideshow id=1547]

Presenting the final of the two chairs gave me an opportunity to invite Roulla to accompany me to the family home to finally shoot the chairs and that evening  we were both treated to a Sushi dinner made by the family

My sincere thanks to Emilios & Julia , Roulla Giorgio and Wendy Shorter Interiors for the training.

Atelier Ray Clarke Ltd T/A Ray Clarke Upholstery & Design Company registration number :12018355