Tag: Sandersons

Money for Nothing Project5: Jay VS Ray (Round2) Rocking a Pair of Farmhouse Chairs

Before:

Whenever an opportunity to reupholster furniture comes with a fairly open brief in terms of design  I always meet it with a sense of excitement, anticipation and just a little anxiety.

So when Jay Blades and the Money for Nothing film crew came to my studio with these two sorry-looking farmhouse style rocking and static armchairs, despite my initial reactions I did have a few ideas bubbling up for the cushions the overall look, however, unfortunately, due to time pressures and other projects on the bench, There wasn’t enough time to come up with another of my own completely original fabric designs.

I did, however, have a vision in mind of some types of fabrics I wanted to use. Being a Massive fan of Timorous Beasties work in Scotland I had to get my hands on one of their amazing designs.

How I treated the show wood was a question I pondered on for a while:

With great respect to the growing numbers of upcyclers, hobbyists and others keen to revamp their furniture, I wanted to treat the wood to a  finish which was a bit different than just simply repainting, and consequently hiding the wonderful grain patterns, knots and characteristics of these Beech wood frames.

Inspiration came within a few feet of my cutting bench when I noticed while sewing some offcuts of a Designers Guild fabric under the cutting table I had used earlier on this year. A wool from their Capisoli range which had a vertical Ombré effect. I thought: ” What If I translated that effect into the wood using a wood stain as opposed to a paint?

After:

May I present to you this re-imagined vintage farmhouse chairs, now in a stunning @timorous_beasties #Grand Blotch Damask.

Accented with Tangerine velvet piping from @kobe_interior_design “Real” velvet range and complementary border fabrics made from @sanderson1860 “Brianza” creamy velvet.

These chairs had to be fully restored: All joints, back rails, and broken spindles fully repaired and all suspension systems cleaned and refitted.

I  created a custom wood stain with a “3D Ombré” effect.  Featuring deep forest greens moving through to autumnal moss. enhanced through many polished layers of  Beeswax.
To be honest this project became more a labour of love than money folks. Hopefully, these two lovelies will feature in a future episode of @monfornothing for BBC1
Many thanks go out to Olga Mackenzie and Rowena Murphy for their assistance, and Tom Foy for all his woodworking advice and masterful craftsmanship in replacing the broken inside back wood dowel.

 

 

Afrotechicolour therapy.. A wax block print patchwork chair

 

Before:

Rick Holland Donor chair4


This Mid-20th century modern piece was given to me back in 2010 by super talented artist, print & textiles designer and all round lovely lady Hannah Edy.

Although it was very much the worse for wear I faithfully kept it in storage thinking “That’ll be a great chair again someday..”

The opportunity to transform this piece came just after Xmas 2014, when a lovely couple contacted me from Mill Hill, NW7 and then made a few journeys’ down to my studio to chat with me about a piece they had previously seen online of my first attempt, a tub chair, at an waxblock patchwork print from a collaboration with Chantal Koning YouMeWe .

The process of transforming and updating this piece was a totally different challenge from my first version.

..A chair can take 8 hours or, in this case 40+ . It depends on your customers budget & ultimately how much love and care you wish to put into its re-upholstery.

This chair alone involves 74 carefully selected , cut, made compliant and stitched panels.

AFTER:

With new fillings of new rubberised hair and foams replaced the hopelessly deteriorated & crumbly foams.  A brand new serpentine spring suspension system, all lashed together(so the springs move in unison)upgraded and replaced the broken dried out Pirelli webbing which was originally stapled to the frame . The buttons are Nobilis Velvet, along with the fabrics, were chosen specifically and carefully between myself and the customer with all fabrics made compliant to the Health,Safety & Fire Regs (1988) through the use of a flame retardant barriercloth.

The Ottoman stools were built from scratch, along with a pair of duck,n,down feather-filled Scatter cushions

My deep thanks go out to Anna who assisted in the rip-down and was a great help for me to bounce off fabric selection ideas, Chantal Koning of YouMeWe for fabric inspiration and sourcing

and to Rick Holland & Katie Pomklova for their patience and input while I put together this work for them.

 2015-05-16 11.27.44

 

 

[portfolio_slideshow id=1914]

Getting off the Bench: Reworking a B&B Italia piece…

 

Before:

Before B&B Italia Charles Bench

I was asked by my customer to take this B&B Italia Italia “Charles” Bench , reduce it’s height by 1″and then deep-button (or “tuft” if you are reading this in the US) in a Sanderson Taormina velvet replacing the tired,

cat scratched and shrunk-in the-wash look of its original cover.

“Looks simple enough a task to me” you might say, until you realise upon removing the cover what is going on underneath; that the whole frame is made from

steel tubing and the high density foam sits directly on a bed of super strength jumbo elastic 3″ webbing.

Of the various ways that could secure the buttoning (sorry, saying “tufting” just doesn’t work for me!), I wanted to use a system that I felt would have the most inflexibility, by which I mean that over time, the pleats wouldn’t be tempted to move around over the foam and elasticated base, while still retaining the look and finish that would still respect the overall original design for Antonio Citterio for B&B Italia by Antonio Citterio

Processes I employed involved getting the whole foam cut down on a giant foam cutting bandsaw, removing the foam entirely from the frame, applying 120z hessian to the base of the foams, removing rubber strips from the tubular steel frame and introducing cut hardwood patterns to provide a tackable surface to secure the buttoning cord and cutting, and fitting extra wood strips as well as applying 1″ extra foam and sundries around the base of the bench which helped to “fill” the gap left between the legs and the base of the bench left from fitting the new cover.

As well as successfully “Van-Dyking” the Velvet as the overall bench width was wider then then width of the roll when taking into consideration the direction of the pile

After

2015-01-27 10.28.38-1

[portfolio_slideshow id=1801]

Atelier Ray Clarke Ltd T/A Ray Clarke Upholstery & Design Company registration number :12018355